Enttec DMXStreamer DMX Recorder and Playback with Remote

The DMXPlayback Mk2 is a simple show recorder with a lot of robust features, making it ideal for straightforward lighting control applications. With this unit you can record and edit a light show using the Show Editor software, then let the unit play back the show for as long as required. Perfect for unattended light shows or demonstrations that run continuously, or to playback snapshots that are static. Stores up to 12 shows.

The DMX Playback Remote Mk2 is an add-on for the DMX Playback MK2 or DMX Streamer. It acts as a remote control to start one of the 12 shows. The remote has 6 switches and 1 shift key the 6 opto-isolated screw terminal switch inputs on the rear of the rack and can be controlled using any infra-red remote. The remote is connected to the DMX Playback Mk2 using a single DB9 cable, no power supply is needed, this cable can be up to 5 meters long.

PLAYBACK F E A T U R E S

• Rack-mountable with optional kits
• Control up to 512 channels
• Record up to 12 shows
• RS232 Serial Port for configuration and interconnection with other control systems
• DMX input port -- User may take snapshots of looks programmed on an external console then store them for inclusion anywhere in any of the 12 shows, or even on hard disk for later retrieval
• DMX output port for playback
• LCD screen provides useful status info
• DMX Start Frame, a special “Power Up” look available for striking lamps or other needs
• Shows can be triggered by switch closure, power up, RS232 command, and more

REMOTE F E A T U R E S

• Start or Stop up to 12 different shows at the touch of a button
• Does NOT require external power source
• Infrared port for control with TV remote
• Simple RS232 connection to master device (DMX PlayBack Mk2 or DMX Streamer)
• 6 Show buttons and 1 shift key button
• Each button has a led indicator
• 6 opto- isolated screw terminal switch inputs at rear
• 2 LED status indicators(OK and ERR)