Chamsys MagicQ PC Wing

Convert your laptop or desktop into a fully featured lighting desk! The MagicQ PC Wing provides the buttons, faders and encoders to enhance your PC into a powerful lighting desk for both programming and playing back shows.

Simply connect the MagicQ PC Wing to your PC or Mac via USB and start to control your lighting rig. In addition to network output from your PC, the MagicQ PC Wing supports two direct DMX512 outputs.

If MagicQ and Chamsys consoles are new to you, Enlightened Lighting highly recommend the following tutorials written by Rob Sayer and published on line at www.onstagelighting.co.uk.

• Cham Sys MagicQ PC Introduction
• MagicQ Tutorial Part 1 – Getting Started
• MagicQ Tutorial Part 2 – Controlling Fixtures and Recording Memories
• MagicQ Tutorial Part 3 – Cues, Timing and FX
• MagicQ Tutorial: Moving Light Part 1 - Control
• MagicQ Tutorial: Moving Light Part 2 – Palettes and Attributes

The MagicQ PC Wing is the ideal tool for every Lighting Designer - light enough to carry in your hand luggage on the plane, but with the full power of a MagicQ console. You need never be stuck with an unknown console again! The MagicQ PC Wing can also be used with touch-screen monitors and touch-screen laptops to further enhance the ease of use.

The MagicQ PC wing incorporates the most important buttons required for programming and playback on MagicQ consoles. Other (not so often used buttons) are available on the PC screen via the mouse. There are 10 playbacks each with Select, Go, Pause, Flash buttons. DBO, Add/Swap and Next Page. The master control section has Go, Pause, Fwd, Bkwd. Then you have the programming buttons Shift, Release, Blind, Clear, Record, Set, Pos, Colour, Beam. Short-cut keys on the MagicQ PC wing can be used for easy access to Palettes.

MagicQ PC wing comes complete with universal power supply and USB cable. A CD with MagicQ PC software and installation instructions is also included.